Grass Valley EDIUS Neo 3 - Manual (Page 81)

EDIUS NEO — User Reference Guide 79
System Application Settings
Modify an Existing Preset
The parameters of an existing preset may be modified from the startup
window or within the EDIUS NEO application.
Modify Preset From the Startup Window
To modify the parameters of an existing preset from the startup window, do
the following:
1. Click the New Project button.
2. From the Presets List, select the existing preset to be modified.
3. Check the Customize box in the bottom left corner (see Figure 74 ).
Figure 74. Customize an Existing Preset
4. Click the OK button.
The Project Settings dialog illustrated in Figure 75 appears.
Note If the advanced parameters are not visible, click the button to
display these parameters.