Grass Valley EDIUS Neo 3 - Manual (Page 740)

738 EDIUS NEO — User Reference Guide
Section 8 — Exporting/Project Output
Save Single Picture
Exports the frame at the Timeline cursor position as a still image.
Save Between In/Out in Sequential Files
Exports all frames between In and Out points on the Timeline as still
image files. Eight (8)-digit sequential numbers are added to the end of
each file name.
Images are exported as explained above depending on the selected file save
button.
9. Click the Close button to close the Still Image Exporter.
Export to Tape
Projects may be exported to tape on any device than can be connected to
and controlled by the EDIUS NEO computer and many devices through
which direct control via EDIUS NEO is not possible.
Output to HDV Device
To output an HDV file (.m2t format) to a tape in an HDV device, do the fol-
lowing:
1. Connect the HDV device to the IEEE1394 port on the EDIUS NEO
computer with a FireWire/IEEE1394 cable.
Note If the HDV device supports HDV mode, set the device to this mode. For more
information see the instruction manual for the HDV device.
2. Select Tools>MPEG TS Writer on the Preview window menu bar. See
Figure 896 .
Note An alternative method is to click the Tools button in the Asset Bin and
select MPEG TS Writer from the menu.
Figure 896. Tools Menu - MPEG TS Writer
The MPEG TS Writer dialog in Figure 897 appears.