Grass Valley EDIUS Neo 3 - Manual (Page 334)

332 EDIUS NEO — User Reference Guide
Section 5 — Timeline Operations
The special clip is placed on the Timeline between the In and Out points.
Alternative Method:
1. Right-click on the area between the In and Out points on the desired
track.
2. Select New Clip>{Special Clip Type} from the right-click menu to create
a new special clip.
3. Create the special clip and click Save, OK or Close as appropriate in the
special clip creation dialog.
Clip Status Indicators
Clips placed on the Timeline may have the status indicators explained
below depending upon editing actions and other operations performed
with these clips.
End of Clip Indicator
The triangular marks in the corners at the beginning and ending of the clip
(see
Figure 366 ) indicate the entire source clip is used on the Timeline.
These marks disappear when the clip is trimmed.
Figure 366. End of Clip Indicator
Rendering Status
The green line above the Timeline scale in Figure 367 indicates the clip has
been rendered. For other rendering status indicators, seeTimeline Scale
Markings
on page 320 .
Figure 367. Rendered Clip Indicator
Filter Set
The brown line above the clip in Figure 368 indicates that a video filter has
been set for this clip.