Grass Valley EDIUS Neo 3 - Manual (Page 253)

EDIUS NEO — User Reference Guide 251
Clip Operations
Figure 254. Set In Button Menu - Clear In
Note To clear the In or Out point for either the video portion of the clip or the audio
portion, select Clear Video In Point, Clear Video Out Point, Clear Audio In
Point or Clear Audio Out Point from the menu as desired.
• Move the slider to the In or Out point and click the Set In or Set Out
buttons while holding down the [ SHIFT ] key.
Note If the Set In button is in Video In or Audio In mode, holding down the [SHIFT]
key while clicking the Set In button on a In point, will clear only the respective
video or audio In point. The same is true with the Set Out button.
Editing Clip Properties
To edit the properties associated with a clip, perform the following actions:
1. Select a clip in the clip view of the Asset Bin and do one of the
following:
• Click the Properties button (highlighted in blue in Figure 255 ).
Figure 255. Asset Bin Properties Button
• Press the [ ALT ]+[ ENTER ] keys on the keyboard.
• Right-click on the clip and select Properties from the menu.