Adjust track panel height – Grass Valley EDIUS Neo 3 User Manual
Page 313
EDIUS NEO — User Reference Guide
311
Timeline Settings
Adjust Track Panel Height
Track panel height may be adjusted for individual panels or for all panels
simultaneously.
To adjust individual track panel height, follow these steps:
1.
Right-click on the track panel to be adjusted.
2.
Select Height>{height unit} from the menu as illustrated in
Note
Track height may be adjusted from 1 height unit to 5 height units which may
vary by track. The currently selected track height is indicated by the check
mark.
Figure 337. Adjust Track Panel Height
The track height is changed according to your selection.
To adjust the height of all selected tracks, do the following:
1.
Right-click on any selected track panel.
2.
Select Height (Selected Tracks)>{height unit} from the menu as
illustrated in