Grass Valley EDIUS Neo 3 - Manual (Page 286)

284 EDIUS NEO — User Reference Guide
Section 5 — Timeline Operations
Figure 294. Insert Mode Example
Overwrite Mode
With overwrite mode enabled, adding a new clip overwrites the existing
clip at the insertion point by the amount of overlap between the two clips.
The length of the sequence does not increase if the inserted clip is shorter
than or equal in length to the clip it overwrites (see
Figure 295 ). Default =
Disabled.
Figure 295. Overwrite Mode Example
Note Insert Mode and Overwrite Mode are mutually exclusive. Only one or the
other is active. Enabling one mode automatically disables the other.
Insert and Overwrite mode are selected by the Toggle Insert/Overwrite Mode
button (highlighted in blue in Figure 296 ) above the Timeline track headers.
Figure 296. Insert/Overwrite Toggle Button
Each click of the button switches modes.