Paste at in/out points of existing clip – Grass Valley EDIUS Neo 3 User Manual
Page 350
348
EDIUS NEO — User Reference Guide
Section 5 — Timeline Operations
4.
Click the Paste to Current Location
button (highlighted in blue in
on the Timeline.
Figure 389. Timeline Paste to Cursor Location Button
The clip is pasted to the Timeline with the position of the Timeline cursor
set as the In point.
Alternative Methods:
•
Right click on an empty location in the track on which you wish to paste
the clip and select Paste from the menu.
•
Select Edit>Paste>Cursor from the Preview window menu bar.
•
Right-click on any clip on the track on which you wish to paste the clip
and select Paste>Cursor from the menu.
•
Press the [
CTRL
]+[
V
] keys on the keyboard.
Note
If a clip already exists at the destination location, it is divided at the point of
the Timeline cursor and the pasted clip overwrites the existing clip at the cut
point or is inserted between the divided clips depending upon the Insert/
Overwrite setting.
Paste at In/Out Points of Existing Clip
To paste a clip at the In or Out point of an existing clip in the Timeline,
follow these steps:
1.
Select a clip and copy, cut or ripple cut it to the clipboard.
2.
Select the clip to be the base point of the paste operation.
3.
Select Edit>Paste>Clip In or Edit>Paste>Clip Out from the Preview
window menu bar based on the desired paste location. See
•
Clip In - Insert the clip before the In point of the selected base clip.
•
Clip Out - Insert the clip after the Out point of the selected base clip.