Grass Valley EDIUS Neo 3 - Manual (Page 349)

EDIUS NEO — User Reference Guide 347
Timeline Clip Operations
Figure 388. Ripple Cut with Sync Mode Enabled
Paste
A paste operation is performed after a clip has been copied or cut to the
clipboard using the copy, cut or ripple cut procedures explained on the pre-
ceding pages.
To paste a clip on the Timeline, do the following:
1. Select a clip and copy, cut or ripple cut it to the clipboard.
2. Select the track on which you wish to paste the clip.
3. Move the Timeline cursor to the position at which you wish to paste the
clip.