Pasting clips, Figure 263 – Grass Valley EDIUS Neo 3 User Manual
Page 264
262
EDIUS NEO — User Reference Guide
Section 4 — Clip Operations and Management
Figure 263. Asset Bin Cut Button
•
Right-click a clip in either the Asset Bin or Timeline and select Cut from
the menu.
•
Select a clip and press [
CTRL
]+[
X
] on the keyboard.
Pasting Clips
Pasting a clip to a new location is available after a clip has been copied or
cut using one of the procedures above.
To paste a clip, select the Asset Bin folder in which you wish to paste the
clip and do one of the following:
•
Click on the
Paste
button (highlighted in blue in
Figure 264. Asset Bin Copy Button
•
Right-click on a blank area in the Asset Bin clip view and select Paste
from the menu.
•
Right-click on a clip and select Paste from the menu.
•
Press [
CTRL
]+[
V
] on the keyboard.
To paste a clip in the Timeline do one of the following:
•
Position the Timeline cursor at the point where you want to paste the
clip and press [
CTRL
]+[
V
] on the keyboard.
•
Right click on a clip on the Timeline and select one of the following from
the menu depending on the desired paste location:
•
Paste>Cursor - paste the clip at the cursor location.
•
Paste>Clip In - paste the clip at the In point.
•
Paste>Clip Out - paste the clip at the Out point.