Grass Valley EDIUS Neo 3 - Manual (Page 742)

740 EDIUS NEO — User Reference Guide
Section 8 — Exporting/Project Output
The Setting dialog shown in Figure 899 appears.
Figure 899. MPEG TS Writer Setting Dialog
Set delays as desired and click the OK button.
7. Click the Write button.
Note To output the video to the HDV device for previewing without recording to
tape, click the Preview
button.
Use the transport buttons illustrated in Figure 900 to control playback
during preview.
Figure 900. MPEG TS Writer Transport Buttons
8. Click the OK button.
9. Click the Exit button to close the MPEG TS Writer.
Output to DV Device
To output to a DV tape through an OHCI connection, do the following:
1. Connect the DV device to the IEEE1394 port on the EDIUS NEO
computer with a FireWire/IEEE1394 cable.
2. Set the DV device to Play mode.
3. Click the Export button in the Recorder. See Figure 901 .