Grass Valley EDIUS Neo 3 - Manual (Page 770)

768 EDIUS NEO — User Reference Guide
Section 8 — Exporting/Project Output
Speed
Set the maximum speed at which the disc should be burned.
Note The write speed is media and drive dependent. Setting a higher speed than
the rating of the media or drive will not result in higher write speeds.
Enable Detailed Settings
Select this option to enable the settings described below.
Work Folder
Specifies the folder for files created while preparing the disc output.
Compile Disc Image to Folder
Creates a disc image file in the work folder that can be burned to disc
or mounted as a virtual drive.
Create Disc and Also Export as Image File
Creates a disc image file in addition to burning the content to disc.
Note Files saved by selecting this option are overwritten by the next disc output
operation. If you need to keep the files in this directory, either specify a dif-
ferent work directory for subsequent output operations or move the existing
files to another directory.
Verify Disc After Creating
After burning content to disc, the disc will be verified to ensure that the
burn was successful. Verification is performed at the maximum read
speed of the drive.
Number of Drives
Select the drive number of the drive you wish to use to burn the disc.
Note It is possible to burn discs on multiple drives simultaneously.
Select the Option tab to set disc play options. The options shown in
Figure 924 are available for selection.