Grass Valley EDIUS Neo 3 - Manual (Page 287)

EDIUS NEO — User Reference Guide 285
Timeline Settings
= Insert Mode = Overwrite Mode
Pressing the [ INSERT ] key on the keyboard also toggles Insert/Overwrite
mode.
Note If Overwrite mode is enabled, ripple settings do not apply.
Ripple Mode
With ripple mode enabled, deleting or trimming a clip causes all the clips
which follow in the Timeline to move to fill in the space formerly occupied
by the trimmed or deleted clip. Default = Enabled.
Note With ripple mode enabled, the behavior of clips on all tracks is also affected
by the status of the Track Ripple Sync Mode setting. The examples below
illustrate the effect of the Track Ripple Sync Mode setting on Ripple Mode
editing.
Figure 297 represents the movement of clips in various tracks on the Time-
line when ripple mode is on, ripple sync is off and insert mode is enabled.
Figure 297. Ripple Mode On/Ripple Sync Off/Insert Mode Enabled
Figure 298 represents the movement of clips in various tracks on the Time-
line when both ripple mode and track ripple sync are turned on with insert
mode also enabled.
Figure 298. Ripple Mode On/Track Ripple Sync Mode On/Insert Mode Enabled