Grass Valley EDIUS Neo 3 - Manual (Page 288)

286 EDIUS NEO — User Reference Guide
Section 5 — Timeline Operations
Ripple mode is toggled on and off by the Set Ripple Mode button (highlighted
in blue in Figure 299 ) above the Timeline track headers.
Figure 299. Set Ripple Mode Button
Each click of the button switches modes.
= Ripple Mode On = Ripple Mode Off
Pressing the [ R ] key on the keyboard also toggles the Ripple mode.
Track Ripple Sync
Track ripple sync may be set for individual tracks or all tracks. When track
ripple sync is enabled, editing one track (inserting, deleting or moving
clips, for example) affects all other tracks for which ripple sync is also
enabled if insert mode is active. All tracks are kept in sync; that is, they
maintain their prior positions relative to one another from the insertion
point on. See
Figure 300 for an example with track ripple sync mode
enabled on all tracks. Default = Enabled for all tracks.
Figure 300. With Insert Enabled
Ripple sync is toggled on and off for all tracks or on a track-by-track basis.
As illustrated in Figure 301 , ripple sync controls are associated with each
track on the Timeline and there is also a master toggle button that sets the
ripple sync mode for all tracks simultaneously.