Enabling/disabling effects – Grass Valley EDIUS Neo 3 User Manual
Page 621
EDIUS NEO — User Reference Guide
619
Effect Operations
Adjust the effect as desired. For more information, see the section on
applying each effect type.
Note
Effects can be modified and saved under a different name as user preset
effects. See Customizing the Effect Palette
for more information.
Enabling/Disabling Effects
To enable or disable effects that have been applied to clips, do one of the fol-
lowing after selecting the desired clip or the mixer area of a clip on the
Timeline:
•
Click the checkbox of the desired effect in the effects list of the Informa-
tion Palette (see
). If the check mark is present, the effect is
enabled. If there is no check mark, the effect is disabled.
Figure 741. Information Palette Effect Enable/Disable
Note
In this example, the mixer area of a clip was selected.
•
Right-click the effect name in the effect list of the Information Palette
and select Enable/Disable from the menu as depicted in
.