Grass Valley EDIUS Neo 3 - Manual (Page 114)

112 EDIUS NEO — User Reference Guide
Section 2 — Settings and Configuration
Sync Mode
If sync mode is enabled, editing a track (inserting or moving clips, for
example) affects other tracks if insert mode is also enabled. All tracks are
kept in sync (maintain their prior positions relative to one another) from the
insertion point on. See
Figure 101 for an example. Default = Not selected.
Figure 101. Sync Mode With Insert Enabled
Ripple Mode
With ripple mode enabled, when a clip is deleted or trimmed, the clips
which follow in the Timeline move to fill in the space formerly occupied by
the trimmed or deleted clip. Default = Selected (On).
Note With ripple mode on, the behavior of clips on all tracks is also affected by the
status of the Sync Mode setting. The examples below illustrate the effect of
the Sync Mode setting on Ripple Mode editing. Both Sync Mode and Ripple
Mode may be simultaneously selected.
Figure 102 represents the movement of clips in various tracks on the Time-
line when ripple mode is on, sync mode is off and insert mode is enabled.
Figure 102. Ripple Mode On/Sync Mode Off/Insert Mode Enabled
Figure 103 represents the movement of clips in various tracks on the Time-
line when both ripple mode and sync mode are turned on with insert mode
also enabled.