Grass Valley EDIUS Neo 3 User Manual
Page 222
220
EDIUS NEO — User Reference Guide
Section 3 — Importing and Capturing
With a clip selected for restoration, the restoration method is selected by
clicking the drop-down list button [ ] in the Restoration Method column
and selecting the desired method from the list. Options are:
Relink (select file)...
Displays an Open dialog from which the source file to relink to the offline
clip may be selected.
Relink (select folder)...
Displays a Browse for Folder dialog. Search for the source file of the same
name as the offline clip in the specified folder and select the file to relink.
Capture All
Click the
Start batch capture
button in the lower left corner of the Restore
Offline Clip dialog to display the Batch Capture dialog. Use the batch
capture dialog to recapture the entire clip.
For more information on the batch capture procedure see Batch Capture
.
Capture Only Areas Used in Timeline
Click the
Start batch capture
button in the lower left corner of the Restore
Offline Clip dialog to display the Batch Capture dialog. Use the batch
capture dialog to recapture the portions of the offline clip(s) used on the
Timeline.
For more information on the batch capture procedure see Batch Capture
.
Don’t Capture
If this method is selected, offline clips are not re-linked or recaptured.
3.
Select the source from the Open or Browse for Folder dialog and click
the
Open
(Open dialog) or
OK
(Browse for Folder dialog) button to relink
the source to the offline clip.
4.
Click the
Close
button in the Restore Offline Clip dialog.
Note
When the Restore Offline Clip Close button is clicked, a message will display
if restoration failed on any offline clips.
5.
Click the
Close
button in the Find Offline Clip dialog.
Alternative Method:
Double-click the offline clip on the Timeline or in the Asset Bin and browse
for the file to link to the clip from the Open dialog box.