Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 40)

40 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Chapter 2 Bill of Materials Completion
Edit Your Project BOM File
The DMAT Wizard you used in Chapter 1 or the steps you followed in Appendix E created an initial bill of
materials (BOM), however, individual preconfigured product listings should be reviewed and possibly edited to
fit your specific application needs.
ProposalWorks software includes a variety of specific product configuration tools to make further BOM
adjustments easy. These steps provide examples of using ProposalWorks Product Configuration Assistants to edit
your initial project BOM file to meet your specific application needs.
Follow these steps to edit the BOM file you imported or assembled for your specific application.
1. Edit a product for your specific application.
a. Double-click a product catalog number to activate the Product Configuration Assistant.
In this example, catalog number 1489-A2D250 was selected.
The Product Configuration Assistant dialog box opens. You can browse and select from a variety of
product options.