Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 227)

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 227
Logic Module Customization Appendix B
Alarm History Faceplate Logic Modification
The alarm history rungs, located in the application and device module R02_Monitor routines, support the HMI
Alarm History faceplate.
If your HMI application does not include the Alarm History faceplate, then you can remove this logic from the
monitor routine for each module. You can locate the Alarm History faceplate logic rungs just below the Alarm
History header, in the rung comments.
To remove logic, select Alarm History rungs in each R02_Monitor routine of each application and device
module and press the delete key or menu item.