Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 108
108
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Chapter 5
FactoryTalk View ME Configuration
The New/Open Machine Edition Application dialog box opens.
8.
From the Existing tab, select the application file that you just restored.
For the Widg-O-matic machine application example, Widg_O_Matic is selected.
9.
Click Open.
The application opens in FactoryTalk View Studio software.
This manual is related to the following products:
- 150 Drives and Motion Accelerator Toolkit Quick Start 21G Drives and Motion Accelerator Toolkit Quick Start 20G Drives and Motion Accelerator Toolkit Quick Start 20F Drives and Motion Accelerator Toolkit Quick Start 2097 Drives and Motion Accelerator Toolkit Quick Start 2094 Drives and Motion Accelerator Toolkit Quick Start