Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 137)

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 137
FactoryTalk View ME Configuration Chapter 5
Configure Equipment Status Faceplate Display
The Equipment Status faceplate display provides a summary status of the devices in your system and another
launch site for your individual device faceplates.
The Equipment Status faceplate files let you quickly load and configure a summary display of preconfigured
status and diagnostic displays or faceplates for FactoryTalk View Machine Edition. The Equipment Status
faceplate works in conjunction with individual device faceplates and provides a single summary display of all of
the device faceplates that may be configured for an application. You can configure up to nine device faceplates to
run with the Equipment Status faceplate and you can launch each device faceplate directly from it.
Example of Equipment Status Display Configured with Four Device Faceplates
IMPORTANT This section is optional and necessary only if you intend to use the Equipment Status faceplate.
CIP Motion Drive
Kinetix 300 Drive
PowerFlex Drive
You can launch these
faceplates from the Goto
buttons.