Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 118

118
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Chapter 5
FactoryTalk View ME Configuration
2.
Launch FactoryTalk View Studio software and open your
existing application file.
For this example, the InstantFizz_ME application file is
opened.
3.
Right-click Displays within Graphics folder and select Add
Component Into Application.
4.
Navigate to the HMI Modules folder within the toolkit’s files folder.
Your personal computer’s harddrive path is
C:\Program Files\RA_Simplification\DMAT\B-Files\5-HMI\ME\HMI Modules.
5.
Select the folder representing the type of the first faceplate you desire to add.
For this example, the 01_Machine folder was selected for the PVP1000_Startup_Faceplate file.
This manual is related to the following products:
- 150 Drives and Motion Accelerator Toolkit Quick Start 21G Drives and Motion Accelerator Toolkit Quick Start 20G Drives and Motion Accelerator Toolkit Quick Start 20F Drives and Motion Accelerator Toolkit Quick Start 2097 Drives and Motion Accelerator Toolkit Quick Start 2094 Drives and Motion Accelerator Toolkit Quick Start