Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 136)

136 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Chapter 5 FactoryTalk View ME Configuration
14. Select all unused Goto Display buttons and delete.
15. Select the State Diagram, Alarm History, and Equipment Status Goto display buttons and verify their
display settings or delete them if not required.
System Goto Display Button Default Display Default Parameter
State Diagram PVPxxx_StateDiagram_Faceplate StateDiagram_Parameter
Alarm History PVP1000_AlarmHistory_Faceplate None required
Equipment Status PVP1000_EquipmentStatus_Faceplate EquipmentStatus_Parameter