Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 236)

236 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Appendix D Logix Designer Communication and Controller Configuration
Verify Your IP Address
1. From the Start menu, select Run.
The Run dialog box opens.
2. Enter cmd.
3. Click OK.
The Windows IP Configuration dialog box opens.
4. Enter ipconfig at the prompt.
5. Press Enter.
6. Verify that the IP address and Subnet Mask match what you entered.
If these numbers do not match what you entered, contact your network administrator.
7. Close the cmd.exe window.