Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 331

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
331
Controller, Network, and Device Configuration Without the DMAT Wizard
Appendix G
The Configure Tag References dialog box opens.
8.
Replace _MachineName with the desired tag name of your machine.
For the Widg-O-matic application example, WidgOmatic is the tag name.
9.
Click OK.
The new Machine Program appears in the Controller Organizer within the Main Task folder.
This manual is related to the following products:
- 150 Drives and Motion Accelerator Toolkit Quick Start 21G Drives and Motion Accelerator Toolkit Quick Start 20G Drives and Motion Accelerator Toolkit Quick Start 20F Drives and Motion Accelerator Toolkit Quick Start 2097 Drives and Motion Accelerator Toolkit Quick Start 2094 Drives and Motion Accelerator Toolkit Quick Start