Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 253
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
253
Create and Add BOM Device Modules Without the DMAT Wizard
Appendix E
d. Select the PVP 6 in Module-L.prp or PVP 10 in Module-L.prp file based on the relative size of your
PanelView Plus required for your application.
For the Widg-O-matic machine application example, the PVP 10 in Module-L.prp file is selected for
support of a PanelView Plus 1000 terminal in the system.
e. Click Open.
The Import Completion Confirmation dialog box opens.
f. Click OK.
The selected PanelView Plus hardware
is added to the end of the initial BOM
file.
5.
Import the Ethernet communication
BOM file.
a. Click File and choose Utilities>Import.
The Import Equipment List from File dialog box opens.
This manual is related to the following products:
- 150 Drives and Motion Accelerator Toolkit Quick Start 21G Drives and Motion Accelerator Toolkit Quick Start 20G Drives and Motion Accelerator Toolkit Quick Start 20F Drives and Motion Accelerator Toolkit Quick Start 2097 Drives and Motion Accelerator Toolkit Quick Start 2094 Drives and Motion Accelerator Toolkit Quick Start