Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 291

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
291
Controller, Network, and Device Configuration Without the DMAT Wizard
Appendix G
This Drive tab applies to the PowerFlex 525 drives
The Connect To Drive dialog box opens.
4.
Expand the Ethernet communication
tree and select the desired PowerFlex
drive.
5.
Click OK.
Multiple data download status dialog
boxes open. Download may take
several minutes.
The I/O Configuration Differences dialog box opens.
This I/O configuration dialog box applies to all PowerFlex drives (except PowerFlex 525).
This manual is related to the following products:
- 150 Drives and Motion Accelerator Toolkit Quick Start 21G Drives and Motion Accelerator Toolkit Quick Start 20G Drives and Motion Accelerator Toolkit Quick Start 20F Drives and Motion Accelerator Toolkit Quick Start 2097 Drives and Motion Accelerator Toolkit Quick Start 2094 Drives and Motion Accelerator Toolkit Quick Start