Configure the logix5000 controller, Check the web for firmware updates – Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 238

238
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Appendix D
Logix Designer Communication and Controller Configuration
Configure the Logix5000 Controller
Check the Web for Firmware Updates
Follow these steps to check for ControlFLASH firmware updates.
1.
From the Start menu, launch the Studio 5000
Logix Designer application.
The Start Page opens.
2.
Click the Resource Center icon on the Start Page.
3.
Choose Downloads>Logix Firmware.
The Get Support Now webpage opens.
4.
Click Control Hardware to access the controller firmware.
5.
Follow the webpage instructions to download firmware.
This manual is related to the following products:
- 150 Drives and Motion Accelerator Toolkit Quick Start 21G Drives and Motion Accelerator Toolkit Quick Start 20G Drives and Motion Accelerator Toolkit Quick Start 20F Drives and Motion Accelerator Toolkit Quick Start 2097 Drives and Motion Accelerator Toolkit Quick Start 2094 Drives and Motion Accelerator Toolkit Quick Start