Module fault customization – Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 225

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
225
Logic Module Customization
Appendix B
Module Fault Customization
The application and device module R02_Monitor routines contain module fault logic.
Module faults are intended to act as a diagnostic tool to cover not only a drive or device fault, but also module
specific faults. You can add custom module fault logic to provide additional diagnostic information based on
your application. The default module specific faults are listed below.
Module Faults
All of the device modules also contain a general drive fault. The Drive Fault is in addition to the drive specific
faults. For example, when a CIP Motion drive faults for an Excessive Position Error, both the drive specific fault
(Excessive Position Error) and general fault (Drive Fault) are displayed on the HMI Alarm History faceplate.
This general Drive Fault is also triggered when a drive faults, but does not provide specific fault information, for
example, PowerFlex 4-class drives.
Fault Description
Module Usage
Alarm History Fault Code
Drive Fault
Device Module
1
Not Ready
• Application Module
• Device Module
2
Failed to Clear
• Application Module
• Device Module
3
Failed to Reset
• Application Module
• Device Module
4
Failed to Start
Application Module
5
Failed to Stop
Application Module
6
Safety Fault
Device Module
7
User Alarm
Reserved
8…19
(1)
(1) Alarm History fault codes 8…19 are placeholders. You can use them to quickly add custom user-defined module faults. Refer to Chapter 5, FactoryTalk View
, for more information on the Alarm History faceplate and its function.
Instruction Error
• Application Module
• Device Module
20
- 150 Drives and Motion Accelerator Toolkit Quick Start 21G Drives and Motion Accelerator Toolkit Quick Start 20G Drives and Motion Accelerator Toolkit Quick Start 20F Drives and Motion Accelerator Toolkit Quick Start 2097 Drives and Motion Accelerator Toolkit Quick Start 2094 Drives and Motion Accelerator Toolkit Quick Start