Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 153)

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 153
System Commissioning Chapter 6
Create Your FactoryTalk View Runtime Application File
Follow these steps to create a runtime file for downloading to a PanelView Plus terminal.
1. From the Application menu, choose Create
Runtime Application.
The Create Runtime Application dialog box
opens.
2. From the Save as type pull-down menu,
choose Runtime 5.10 Application (*.mer).
3. Enter a File Name for the application.
For the Widg-O-matic application example,
the file name is WidgOmatic_HMI.mer.
4. Click Save.
The Runtime application (*.mer) file is
created. This may take a few minutes.
Download Runtime File to PanelView Plus Terminal
1. Open FactoryTalk View Studio Machine
Edition software.
2. From the Tools menu, choose Transfer
Utility.
The Transfer Utility window opens.