Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 268)

268 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Appendix F Assemble Project Drawing Set Without the DMAT Wizard
3. Copy the footprint drawings that match your specific component’s family or series.
For the Widg-O-matic machine application example, the 320_PF750_Series_Footprints.dwg file was
copied to accommodate the layout of the PowerFlex 753 drive onto the Subpanel.
4. Paste the drawing or drawings into your Project
Drawings folder.
5. Repeat step 2 … step 4 to select your other Kinetix, Power
Component, and PanelView Plus footprint drawings.
These project library drawing files comprise the initial
drawing set used to create the Widg-O-matic machine
application project drawings.