Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 285

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
285
Controller, Network, and Device Configuration Without the DMAT Wizard
Appendix G
This Module Definition example applies to the PowerFlex 525 EENET drives.
9.
Click OK to close the New Module dialog box.
IMPORTANT
The PowerFlex 525 drive supports up to four (4) datalinks IN and OUT, but is not required for the PowerFlex 525
faceplate functionality. The Output Current datalink is used to provide a reference/placeholder in the logic of the device
module to scale datalink values accordingly.
This manual is related to the following products:
- 150 Drives and Motion Accelerator Toolkit Quick Start 21G Drives and Motion Accelerator Toolkit Quick Start 20G Drives and Motion Accelerator Toolkit Quick Start 20F Drives and Motion Accelerator Toolkit Quick Start 2097 Drives and Motion Accelerator Toolkit Quick Start 2094 Drives and Motion Accelerator Toolkit Quick Start