Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 103)

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 103
FactoryTalk View ME Configuration Chapter 5
Before You Begin
• Complete your logic configuration (refer to Chapter 4 ) or
• Complete Appendix G
What You Need
• The Drives and Motion Accelerator Toolkit DVD, publication IASIMP-SP017 . For a copy of the DVD,
contact your local Rockwell Automation distributor or sales representative.
• FactoryTalk View Studio software, version 5.1 or later.
• The user manual for FactoryTalk View Studio, Volume 1. Refer to the FactoryTalk View Machine Edition
User's Guide, publication
VIEWME-UM004 .
• The user manual for FactoryTalk View Studio, Volume 2. Refer to the FactoryTalk View Machine Edition
User's Guide, publication
VIEWME-UM005 .
Equipment Status Faceplate Display
Alarm History Faceplate Display
The Alarm History display provides time and date stamped
machine and device faults and alarms.
This display is sized for use in PanelView Plus 700 or larger
terminals.
This Equipment Status display provides a summary
status of the devices in your system and a launch site for
your individual device faceplate displays.
This display is sized for use in PanelView Plus 700
or larger terminals.
Equipment Status Faceplate for Energy Monitoring Display
In addition to the standard Equipment Status Faceplate, an additional
equipment status faceplate is provided specifically for displaying energy
related status. This Equipment Status display for Energy Monitoring
provides an energy status summary of the devices in your system and a
launch site for your individual device faceplate displays.
This display is sized for use in PanelView Plus 700 or larger terminals.