Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 345

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
345
Controller, Network, and Device Configuration Without the DMAT Wizard
Appendix G
Import and Configure Kinetix 300 EtherNet/IP Motion Drive Modules
Follow these steps to add preconfigured Kinetix 300 EtherNet/IP motion drive device logic modules to your
Logix Designer project.
1.
Expand the Tasks folder in your Controller Organizer and right-click the Main Task folder.
2.
Choose Import Program.
3.
Navigate to the 4-Controller Logic folder within the toolkit’s files folder and open the 03_Device Modules
folder.
Your personal computer’s harddrive path is
C:\Program Files\RA_Simplification\DMAT\B-Files\4-Controller Logic.
This manual is related to the following products:
- 150 Drives and Motion Accelerator Toolkit Quick Start 21G Drives and Motion Accelerator Toolkit Quick Start 20G Drives and Motion Accelerator Toolkit Quick Start 20F Drives and Motion Accelerator Toolkit Quick Start 2097 Drives and Motion Accelerator Toolkit Quick Start 2094 Drives and Motion Accelerator Toolkit Quick Start