Yaskawa AC Drive-P1000 Industrial Fan - Manual (Page 54)

Internal/Flush-Mount
An internal flush-mount requires an installation support set that must be purchased separately. Contact a Yaskawa
representative to order an installation support set and mounting hardware. Figure 2.13 illustrates how to attach the Installation
Support Set A.
1.
Cut an opening in the enclosure panel for the digital operator as shown in Figure 2.14 .
2.
Mount the digital operator to the installation support.
3.
Mount the installation support set and digital operator to the enclosure panel.
Enclosure panel
Unit: mm
Digital Operator
Installation Support Set A
M4 × 10
Phillips truss head screw × 4
(for panel widths between 1 and 1.6)
M3 × 6
Phillips recessed
pan head machine screw × 2
Figure 2.13 Internal/Flush Mount Installation
Note: Use a gasket between the enclosure panel and the digital operator in environments with a significant amount of dust or other airborne debris.
120
45
59 +0.5
0
89
+0.5 0
Unit : mm
Figure 2.14 Panel Cut-Out Dimensions (Internal/Flush-Mount Installation)
2.2 Mechanical Installation
54 YASKAWA SIEP YAIP1U 01B AC Drive - P1000 Technical Manual