Yaskawa AC Drive-P1000 Industrial Fan - Manual (Page 171)

No. Name Setting Range Default
b5-95 EZ Wake-up Mode 0, 1 <1> 0
<1> Unit and resolution are determined by b5-20, b5-39, and b5-46. Internally limited to b5-38. Changing b5-20, b5-38 and b5-39 will not automatically
update the value of this parameter.
Setting 0: Absolute
Setting 1: Setpoint Data
n b5-96: EZ Wake-up Time
The drive will wake up when the PID Feedback drops below the b5–94, EZ Wake-up Level for the time set in this parameter.
No. Name Setting Range Default
b5-96 EZ Wake-up Time 0.0 to 1000.0 <1> 1.0 s
<1> Unit and resolution are determined by b5-20, b5-39, and b5-46. Internally limited to b5-38. Changing b5-20, b5-38 and b5-39 will not automatically
update the value of this parameter.
n b5-34: PID Output Lower Limit
Sets the minimum possible PID controller output as a percentage of the maximum output frequency (E1-04). The lower limit
is disabled when set to 0.00%
No. Name Setting Range Default
b5-34 PID Output Lower Limit -100.0 to 100.0% 0.00%
n b5-35: PID Input Limit
Sets the maximum allowed PID input as a percentage of the maximum output frequency (E1-04). Parameter b5-35 acts as a
bipolar limit.
No. Name Setting Range Default
b5-35 PID Input Limit 0.0 to 1000.0% 1000.0%
n b5-40: Frequency Reference Monitor Content During PID
Sets the content of the frequency reference monitor display (U1-01) when PID control is active.
No. Name Setting Range Default
b5-40 Frequency Reference Monitor Content During PID 0, 1 0
Setting 0: Frequency Reference after PID
Monitor U1-01 displays the frequency reference increased or reduced for the PID output.
Setting 1: Frequency Reference
Monitor U1-01 displays the frequency reference value.
n b5-41: PI Unit Selection
Sets the display units in U5-14 and U5-15.
No. Name Setting Range Default
b5-41 PI Output 2 Unit Selection 0 to 15; 25 0
5.2 b: Application
YASKAWA SIEP YAIP1U 01B AC Drive - P1000 Technical Manual 171
5
Parameter Details