Yaskawa AC Drive-P1000 Industrial Fan - Manual (Page 425)

No.
(Addr.
Hex)
Name Description Values Page
d1-17
(292) Jog Frequency Reference
Sets the Jog frequency reference. Setting units are determined by parameter
o1-03.
Default: 6.00 Hz
Min.: 0.00
Max.: 400.00
<1>
181
<1> Range upper limit is determined by parameters d2-01, Frequency Reference Upper Limit, and E1-04, Maximum Output Frequency.
u d2: Frequency Upper/Lower Limits
No.
(Addr.
Hex.)
Name Description Setting Page
d2-01
(289)
Frequency Reference Upper
Limit
Sets the frequency reference upper limit as a percentage of the maximum
output frequency.
Default: 100.0%
Min.: 0.0
Max.: 110.0
183
d2-02
(28A)
Frequency Reference Lower
Limit
Sets the frequency reference lower limit as a percentage of the maximum
output frequency.
Default: 0.0%
Min.: 0.0
Max.: 110.0
183
d2-03
(293)
Master Speed Reference
Lower Limit
Sets the lower limit for frequency references from analog inputs as a
percentage of the maximum output frequency.
Default: 0.0%
Min.: 0.0
Max.: 110.0
184
u d3: Jump Frequency
No.
(Addr.
Hex)
Name Description Values Page
d3-01
(294)
Jump Frequency 1
Eliminates problems with resonant vibration of the motor/machine by
avoiding continuous operation in predefined frequency ranges. The drive
accelerates and decelerates the motor through the prohibited frequency ranges.
Setting 0.0 disables this function.
Parameters must be set so that d3-01 ≥ d3-02 ≥ d3-03.
Default: 0.0 Hz
Min.: 0.0
Max.: 400.0
184
d3-02
(295)
Jump Frequency 2
Eliminates problems with resonant vibration of the motor/machine by
avoiding continuous operation in predefined frequency ranges. The drive
accelerates and decelerates the motor through the prohibited frequency ranges.
Setting 0.0 disables this function.
Parameters must be set so that d3-01 ≥ d3-02 ≥ d3-03.
Default: 0.0 Hz
Min.: 0.0
Max.: 400.0
184
d3-03
(296)
Jump Frequency 3
Eliminates problems with resonant vibration of the motor/machine by
avoiding continuous operation in predefined frequency ranges. The drive
accelerates and decelerates the motor through the prohibited frequency ranges.
Setting 0.0 disables this function.
Parameters must be set so that d3-01 ≥ d3-02 ≥ d3-03.
Default: 0.0 Hz
Min.: 0.0
Max.: 400.0
184
d3-04
(297)
Jump Frequency Width
Sets the dead-band width around each selected prohibited frequency reference
point.
Default: 1.0 Hz
Min.: 0.0
Max.: 20.0
184
u d4: Frequency Reference Hold and Up/Down 2 Function
No.
(Addr.
Hex)
Name Description Values Page
d4-01
(298)
Frequency Reference Hold
Function Selection
0: Disabled. Drive starts from zero when the power is switched on.
1: Enabled. At power up, the drive starts the motor at the Hold frequency that
was saved.
Default: 0
Range: 0, 1
185
d4-03
(2AA)
Frequency Reference Bias
Step (Up/Down 2)
Sets the bias added to the frequency reference when the Up 2 and Down 2
digital inputs are enabled (H1-oo = 75, 76).
Default: 0.00 Hz
Min.: 0.00
Max.: 99.99
186
d4-04
(2AB)
Frequency Reference Bias
Accel/Decel (Up/Down 2)
0: Use selected accel/decel time.
1: Use accel/decel time 4 (C1-07 and C1-08).
Note: The functionality of setting 1 is only accessible via
MEMOBUS/Modbus communication.
Default: 0
Range: 0, 1
187
B.5 d: References
YASKAWA SIEP YAIP1U 01B AC Drive - P1000 Technical Manual 425
B
Parameter List