beautypg.com

Removing and disassembling the cooling fan unit, 4 drive cooling fans – Yaskawa AC Drive-P1000 Industrial Fan User Manual

Page 365

background image

WARNING!

Electrical Shock Hazard. Do not connect or disconnect wiring while the power is on. Failure to comply can result in serious

personal injury. Before servicing the drive, disconnect all power to the equipment. The internal capacitor remains charged even after the

power supply is turned off. After shutting off the power, wait for at least the amount of time specified on the drive before touching any

components.
CAUTION!

Burn Hazard. Do not touch a hot drive heatsink. Failure to comply could result in minor or moderate injury. Shut off the power

to the drive when replacing the cooling fan. To prevent burns, wait at least 15 minutes and ensure the heatsink has cooled down.
NOTICE:

Follow cooling fan and circulation fan replacement instructions. Improper fan replacement may cause damage to equipment. When

installing the replacement fan into the drive, make sure the fan is facing upwards. Replace all fans when performing maintenance to help

ensure maximum useful product life.

n

Removing and Disassembling the Cooling Fan Unit

1.

Remove the terminal cover and front covers 1 and 2.

CAUTION!

Crush Hazard. Do not completely remove the cover screws, just loosen them. If the cover screws are removed

completely, the terminal cover may fall off and cause an injury. Take special care when removing and reattaching the terminal

covers for larger drives.

2.

Remove the connectors for the cooling fan relay and the circuit board cooling fan.

Circuit board cooling fan (R)

Circuit board cooling fan (L)

A

B

C

D

I

E

F

H

G

E

F

I

G

H

A – Fan unit (L)

B – Fan relay connector (L)

C – Fan unit (R)

D – Fan relay connector (R)

E – Circuit board cooling fan

F – Circuit board cooling fan case

G – Hook

H – Circuit board cooling fan connector

I – Circuit board cooling fan cable

Figure 7.42 Component Names: 4A0930 and 4A1200

3.

Loosen screws A (4 count) and B (18 count) and slide the panel to the right.

Note:

The fan unit can be removed by loosening these screws; they do not need to be removed.

7.4 Drive Cooling Fans

YASKAWA SIEP YAIP1U 01B AC Drive - P1000 Technical Manual

365

7

Periodic Inspection & Maintenance

This manual is related to the following products: