Yaskawa AC Drive-P1000 Industrial Fan - Manual (Page 52)

3.
Gradually take up the slack in the wires and hoist the drive after the wires are stretched tight.
4.
Lower the drive when ready to install in the enclosure panel. Stop lowering the drive when it is near the floor then
begin lowering the drive again very slowly until the drive is placed correctly.
u Digital Operator Remote Usage
n Remote Operation
The digital operator mounted on the drive can be removed and connected to the drive using an extension cable up to 3 m long
to facilitate operation when the drive is installed in a location where it can not be easily accessed.
The digital operator can also be permanently mounted remote locations such as panel doors using an extension cable and an
installation support set (depending on the installation type).
Note: Refer to Drive Options and Peripheral Devices on page 376 for information on extension cables and installation support sets.
S/N : J007XE273710001
Operator Drive
Communication Cable Connector
Comm Port
Figure 2.9 Communication Cable Connection
n Digital Operator Remote Installation
Digital Operator Dimensions
S/N : J007XE273710001
90
78
60
7.9
50
12.2 1.6
44
15
Installation holes (2-M3 screws, depth 5)
minimum
Unit: mm
Figure 2.10 Digital Operator Dimensions
NEMA Keypad Kits
Yaskawa offers keypad kits that provide the functionality of the digital operator on enclosures designed for NEMA Type 1,
3R, 4, 4X, 12, or IPX6 environments. These kits are for use with digital operator models JVOP-180 and JVOP-182.
2.2 Mechanical Installation
52 YASKAWA SIEP YAIP1U 01B AC Drive - P1000 Technical Manual