Yaskawa MP920 User's Manual Design - Manual (Page 484)

11 Maintenance and Inspection
11.3.5 Connecting to SVA-01A Module
11-12
11.3.5 Connecting to SVA-01A Module
This section describes how to connect the Battery Module to the SVA-01A Module.
„ System Connection Example
The following illustration shows an example of connecting a system that uses the SVA-01A,
Input, and Output Modules.
• The customers are responsible to prepare connecting cables because they are not prepared by
Yaskawa.
• The cable-end connectors connected to the external power supply/external I/O connector (1CN)
and the battery voltage output connector (2CN) on the Battery Module are attached to the Battery
Module.
DO-01
Output Module
Sinking output
Common
External power
Supply
24VDC
+24V
024V
Power
circuit
5mA
CHK
CHKG
+24V
024V
Battery Module
JRMSP-120XCP96000
Internal connector
3CN
2CN
Lithium battery
ER6VC3
1CN
4.7k Ω
11
1
1CN
12
2
13
3
15,16
5,6
14
4
ALM1
ALM1G
ALM2
ALM2G
PON
PONG
50mA max.
Sourcing
inputs
Common
DI-01
Input Module
BAT
BATG
+
-
1
26
BAT
SVA-01A Module
14 to 20
1 to 7
50mA max.
50mA max.
IMPORTANT