Yaskawa MP920 User's Manual Design - Manual (Page 388)

6 System Startup
6.2.6 Transferring Definitions, Parameters, and Programs
6-58
Preparations for Transfer
Use the following procedure to set the CPU to STOP status after switching from offline to
online.
1. Logoff
On the File Manager Window, right-click CPU1 in the XY-TABLE PLC folder and click
Logoff (U).
2. Click the Yes button in the following message box.
3. Logon
a) On the File Manager Window, right-click CPU1 in the XY-TABLE PLC folder and
then click Online (O).