Yaskawa MP920 User's Manual Design - Manual (Page 256)

5.4 Analog Modules
5-61
5
the start and end I/O register numbers set in the Module Definition Window. Make sure
that the same values are not set more than once.
3. Set the input range, register number, and scan for channels that will be used. Do not
enter settings for channels that will not be used.
The data input for the AI-01 Module will be stored in the input register set in the AI-01 Configuration
Window.
„ Offset/Gain Settings
The normal offset and gain for the AI-01 Module do not need to be changed because the reg-
ister input values specified for the required voltage (or current) are adjusted at shipment for
input. Use the following procedure to adjust the offset and gain only when the 0-V adjust-
ment is required for external devices.
1. Click the Channel field and click Offset/Gain(O) in the Set(S) menu in the AI-01 Con-
figuration Window.
INFO