Yaskawa MP920 User's Manual Design - Manual (Page 385)

6.2 System Startup Procedure
6-55
6
3. Use the following procedure to set up the communications environment for Port 2.
a) Double-click 2 in the Logical column on the Communication Process Window to dis-
play the Setting Window.
b) Click the button on the right side of Port Kind and then click Serial. Next, click
the Detail button to display the Detail Setting Window.
c) Click the button on the right side of Physical Port in the Detail Setting Window
and click COM2. Then, click the OK button.
The Detail Setting Window will return.