Yaskawa MP920 User's Manual Design - Manual (Page 47)

2.1 Specifications
2-21
2
„ DeviceNet Interface Module (260IF)
Table 2.19 shows the hardware specifications of the 260IF DeviceNet Interface Module.
Table 2.19 Hardware Specifications of the 260IF DeviceNet Interface Module
Item Specifications
Name 260IF
Model Number JEPMC-CM230
Number of Lines 1
Supported Communications
Methods I/O transmission function
Explicit messages
(Both must conform to DeviceNet.)
I/O
Transmission Max. Number of
Slaves 63 nodes
Max. Number of I/O
Bytes 2,048 bytes, 256 bytes/node
Message
Communica-
tions (Only
for Master) Max. Number of
Nodes for Message 63 nodes
Max. number of nodes for simultaneous communications: 8
Max. Message
Length 256 bytes
Function for
Execution MSG-SEND function
Settings 2 rotary switches on the front
panel Node address setting
DIP switch on the front panel Baud rate setting
Master/slave selection
Indicators 2 LED indicators MS and NS
Power Supply Voltage for
Communications 24 VDC ± 10 % (supplied by special cable)
Current Consumption Communications power supply: 45 mA max. (supplied from the
communications connector)
Internal circuit power supply (supplied from the PLC)
Mass 100 g
Dimensions (mm) 40 × 130 × 105 (W × H × D)