Yaskawa MP920 User's Manual Design - Manual (Page 30)

2 MP920 Specifications and System Configuration
2.1.2 Hardware Specifications
2-4
„ Power Supply Module (PS-01)
Table 2.3 shows the hardware specifications of the PS-01 Power Supply Module.
Table 2.3 Hardware Specifications of the PS-01 Power Supply Module
Item Specifications
Name AC Power Supply Module
Model Number JEPMC-PS210
Description PS-01
Input Conditions Input voltage 85 to 276 VAC
Input current 3.0 A max. (rated I/O)
Inrush current 10 A max. at cold start
100 VAC: 4.5 A
200 VAC: 9.5 A
Output
Characteristics Output voltage 5 V
Rated current 10.0 A
Output current
range 1.0 to 10.0 A
Adjustment error Within ±2% (input voltage fluctuation, load fluc-
tuation)
Efficiency 70% min.
Protection Power failure
detection level 65 to 85 VAC
Overcurrent
protection Effective when output current is more than 105%
of rated current. It is reset automatically.
Overvoltage
protection Output stops at 6.0 to 7.0 V more than the speci-
fied maximum voltage, and resets when input
turns ON again.
Power failure
detection If power stops for less than 20 ms, it is not con-
sidered a power failure. Between 20 ms and 35
ms is indeterminate, and more than 35 ms is
always treated as a power failure.
Safety Safety standards Conforming to UL and CSA
Fuse 250 V/3 A
External Wiring
Terminals External power
terminals AC, AC
Protective ground
terminal FG, SG
Terminal screws: Phillips M4
Terminal wire size :1.5 mm
2 (AWG16) to 2.5 mm 2 (AWG13)
Hot Swapping
(Insert/Remove
while power is
being supplied) Not allowed.
Indicators POWER (green): Lit while power is ON
Dimensions (mm) 80 × 130 × 105 (W × H × D)