Yaskawa MP920 User's Manual Design - Manual (Page 330)

5.7 Expansion Module
5-135
5
5.7.2 Mounting Base
The following illustration shows the appearances of the MB-01 and MB-02 Mounting
Bases.
„ MB-01
„ MB-02
The parts of the Mounting Base are described below.
1. Base Mounting Holes
Elongated holes used to mount the Mounting Base to a panel, such as a control panel.
2. Power Supply Module Connector
A dedicated connector used to mount the Power Supply Module (PS-01, PS-03).
3. Module Mounting Hole
A hole in which the protrusion on the back of a Module is inserted to secure the Module.
4. Module Mounting Tapped Hole
A tapped hole used to secure a Module to the Mounting Base.
5. Module Connector
A connector used to mount a Module (except the Power Supply Module).
6. Handles
Handles used when installing the Mounting Base.
6.
1.
2.
3. 4.
5.
6.
1.
2.
3.
4.
5.