Yaskawa MP920 User's Manual Design - Manual (Page 248)

5.4 Analog Modules
5-53
5
„ Analog Input Connectors
The use of the analog input connectors is shown below.
„ Connector Specifications
The following table shows the specifications of the connector used to connect the AI-01
Module.
„ AI-01 Connecting Cables
Models
JEPMC-W6080-05: 0.5 m
JEPMC-W6080-10: 1.0 m
JEPMC-W6080-30: 3.0 m
Appearance
The CN1 connector is used to connect an AI-01 Module to external
devices. Use the following standard cable for this connector.
• JEPMC-W6080-††
Number of input channels: 4
CN1
Name Connector
Name
Number
of Pins
Connector Cable
On Module On Cable Manufacturer
Analog Input
Connector CN1 26 10226-52A2JL • Connector body:
10126-3000VE
• Shell:
10326-52A0-008
(Screw lock)
10326-52F0-008
(One-touch lock)
3M JEPMC-W6080-05
JEPMC-W6080-10
JEPMC-W6080-30
L 150
26 loose wires
NP: JEPMC-W6080-05