Transfer procedure – Yaskawa MP920 User's Manual Design User Manual

Page 390

6 System Startup

6.2.6 Transferring Definitions, Parameters, and Programs

6-60

b) Click the Stop button in the following message box.

c) Click the Yes button in the following message box.

d) Confirm that the message box has entered STOP status, and click the Close button.

Transfer Procedure

The following screens show the transfer procedure for definitions, parameters, and pro-
grams.

1. Right-click CPU1 in the XY-TABLE PLC folder, scroll down in order of File Transfer

(T)

→ All File Transfer (A) → All Program File Load (HD → CPU) (L), place the cur-

sor on All Program File Load (HD

→ CPU) (L), and click.