Yaskawa MP920 User's Manual Design - Manual (Page 263)

5 Modules
5.4.2 AO-01 Analog Output Module
5-68
„ AO-01 Module Allocations
Channels for the AO-01 Module are allocated according to the following procedure.
1. Click the button on the right side of the Module field in the applicable slot number
column (05 in the above example) in the Module Definition Window. Click AO-01 and
set the starting I/O register. Double-click the slot number, and the AO-01 Configuration
Window will be displayed.
2. Set the applicable values in the Out Range, REG No., and SCAN columns in the AO-01
Configuration Window. Set the register number to a value within the range specified by
the start and end I/O register numbers set in the Module Definition Window. Make sure
that the same values are not set more than once.