Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 71)

Setting up OPC and DDE communications

3–9
Server Computer Name or Address
If the OPC server is remote, type the server computer’s name
or address, or click ... and select a server computer from the list
that appears.
You can use these formats to specify the name or address:
You set up the computer’s name or address in the Windows ®
Control Panel, as described in “Identifying the RSView32
server computer” on page 17-6.
For more information about IP (Internet Protocol) addresses,
see page E-10.
Use this syntax For this
format
Example
\\ComputerName UNC
(Universal
Naming
Convention) \\DTB1
ComputerName.Domain.com DNS (Domain
Name System)
DTB1.NET2.COM
XXX.XX.XXX.XXX Raw TCP/IP
address 134.87.167.148