Rockwell Automation 9301 Series RSView32 Users Guide - Manual (Page 651)

RSView32 commands

A–31
display from the cache, use the FlushCache [file]
command.
[/Pfile] The name of the parameter file that contains the tag
names to be substituted for placeholders in the
display. If the display does not contain placeholders,
do not use this parameter.
If the parameter file has a long file name, enclose the
file name in quotes, for example /P“Long file name”.
[/Ttag_name] One or more tags, separated by commas and no
spaces, to be substituted for placeholders in the
display. If the display does not contain placeholders,
do not use this parameter.
[/Hnnn] Specifies the height of the graphic display in pixels.
[/Wnnn] Specifies the width of the graphic display in pixels.
[/Min] Runs the graphic display minimized (as an icon).
[/Max] Runs the graphic display maximized (full–screen
size).
[position] Specifies the position of the window as follows:
/Q1
top right corner
/Q2 top left corner
/Q3 bottom left corner
/Q4 bottom right corner
/CT centered in the top half
/CB centered in the bottom half
/CL centered on the left side
/CR centered on the right side
/CC centered in the screen
/Xnnn nnn pixels from the left edge
/Ynnn nnn pixels down from the top